高功率值小功率疲劳实验仪（耐电弧放电疲劳实验仪）-（计算机硬件设定）

High voltage low current tester (arc resistance tester) - (computer control)

食产品标题：耐电弧试验机

Product name: electric arc resistance tester

护肤品应用：NDH-A

Product model: NDH - A

需求规格：GB/T 1411-2002《混合物绝缘性用料耐高压得很低的电压弧光蓄电池充电的现场实验》（同等IEC  61621-1997）及ASTM D495等原则的必须方案手工制造的，并契合IEC 149、UL 746A等现场实验办法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

重点常用区域及功效：

本试验台机是假设按照选用做交流接触器、电嚣和家庭装电嚣等市场的水电工用塑胶片、硅胶粘合剂胶和电隔绝电阻漆等电隔绝电阻文件的耐焊弧特点考评，主用做气体电隔绝电阻文件如：塑胶片、聚酰亚胺膜、硅胶粘合剂、白云母、瓷质、夹丝玻璃、电隔绝电阻油、电隔绝电阻漆、厚纸板等导电介质的耐焊弧特点软件测试；

本耐压试验仪由计算出来机管理运作，不错表示到现阶段检测睡眠状态及检测日期，检测完后并保管到现阶段检测资料，并可打印纸.标准规定试验计划书。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 该机为前后左右一梯设计，中下部为方法体统，顶部为测试箱。

2 本好产品利用*新智力调控技术水平，利用选泽软件程序（IEC或ASTM）可自功做试验报告，并在网吧安卓手机展现经过多次实验发现时和的结果。

3 **稳定性好的，抗干涉专业能力强，测试方法精确高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 弧光通断周期精度：值为 ±10ms

2 调压器发热量：2kVA

3 电机额定功率实验工作电压：12.5kV

4 试验装置电阻要求：±3%

5 电流值抑制误差：±10%  电压电流在测量精密度较：1.5%

6 参比电极对试板压力差：（0.5±0.05）N

7 探针物料：钨棒

8 工业的距离：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 用自然环境热度：（23±2）℃

10 用环保温度湿度：（50±5）%

11 电：220V±5%  50Hz  10A

12 疲劳试验    最简单的方法：   执行标准/美标/10 mA 重复/20 mA 连续式/30 mA接连/40 mA陆续

13 疲劳试验程序流程正确：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 类产品机型：

NDH-A    耐脉冲试验台仪-微机调节

NDH-B    耐电弧焊接冲击试验仪-触模屏操纵

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！